Hwm AISI 316H Stainless Hlau los ntawm Gnee
Mar 23, 2026
Tso lus
🧪 Chemical Composition
| Element | Kev sib xyaw (%) |
|---|---|
| Cov pa roj carbon (C) | 0.04 - 0.10 |
| Manganese (Mn) | Tsawg dua lossis sib npaug li 2.00 |
| Silicon (Si) | Tsawg dua lossis sib npaug li 0.75 |
| Phosphorus (P) | Tsawg dua lossis sib npaug li 0.045 |
| Sulfur (S) | Tsawg dua lossis sib npaug li 0.030 |
| Chromium (Cr) | 16.0 - 18.0 |
| Nickel (Ni) | 10.0 - 14.0 |
| Molybdenum (hli) | 2.0 - 3.0 |
| Nitrogen (N) | Tsawg dua lossis sib npaug li 0.10 |
| Hlau (Fe) | Tshuav |
⚙️ Mechanical Properties
| Khoom | Tus nqi |
|---|---|
| Tensile Strength (Chav Kub) | Ntau dua lossis sib npaug li 515 MPa |
| Yield zog (0.2% Offset) | Ntau dua lossis sib npaug li 205 MPa |
| Elongation (50 hli ntsuas) | Ntau dua lossis sib npaug li 40% |
| Kev txo qis ntawm cheeb tsam | Ntau dua lossis sib npaug li 50% |
| Hardness (Brinell) | Tsawg dua lossis sib npaug li 217 HB |
| Hardness (Rockwell B) | Tsawg dua lossis sib npaug li 95 HRB |
| Impact Zog (Charpy V-notch, 20 degree) | Ntau tshaj lossis sib npaug rau 120 J |
| Fatigue Limit (107lub voj voog) | 240 MPa |
| Young's Modulus | 200 GPa |
| Shear Modulus | 81gp ua |
🔬 Lub cev muaj zog
| Khoom | Tus nqi |
|---|---|
| Ceev (20 degree) | 8.0 g / cm³ |
| Melting Point | 1400-1450 degree |
| Thermal conductivity (20 degree) | 16.2 W/m·K |
| Thermal conductivity (100 degree) | 17.5 W/m·K |
| Thermal Expansion (20-100 degree) | 16.0×10-6/K |
| Thermal Expansion (20-300 degree) | 17.0×10-6/K |
| Thaum tshav kub kub (20 degree) | 500 J/kg · K |
| Hluav taws xob tiv thaiv (20 degree) | 0.74 µΩ·m |
| Sib nqus Permeability | 1.02 µr (max) |
| Curie Kub | Tsis yog-magnetic |
📏 Product Specifications
| Specification | Muaj Kev Xaiv |
|---|---|
| Cov Khoom Muag Khoom | Round bar, tiaj tiaj, daim hlau, ntawv, raj, kav, forgings, castings |
| Round Bar Diameter | 6mm - 300 hli |
| Flat Bar Dimensions | 10 × 3mm - 150 × 50mm |
| Phaj Thickness | 3mm - 100 hli |
| Daim ntawv Thickness | 0.5 hli - 3mm |
| Tube sab nraud | 6mm - 219 hli |
| Kev Ua Raws Cai | ASTM A240, A276, A312, A479, EN 10088, JIS G4303, GB / T 1220 |
| Nto tiav | Kub dov, txias kos, ci annealed, pickled, polished (2B, BA, No.4) |
| Dimensional kam rau ua | ± 0.1mm txog ± 0.5mm (nyob ntawm daim ntawv khoom) |
| Ntev Options | Standard ntev: 3m, 6m, 12m; Kev cai ntev muaj |
Xa kev nug